MARTIN Rush MH6 Wash

Projecteur asservi à LED, type lyre, 12x 10W RGBW LED, zoom 10° à 60°, 2 000 lumens, 155W

Descriptions détaillées



The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

FEATURES
  • 12 x 10 W Osram Ostar RGBW LED’s
  • Single-lens wash with fully premixed color
  • 2,000 lumen output
  • 10°–60° zoom
  • 32 pre-built color macros
  • Temperature-controlled cooling system
  • Digital display menu
  • PowerCON in and through
  • 3 and 5-pin DMX options
TECH SPECS
Dynamic Effects
  • Color mixing: RGBW
  • Color presets: 36 color presets plus full white, ‘color wheel’ effects
  • Electronic dimming: 0 - 100%, four dimming curve options
  • Strobe and pulse effects: Variable speed and action, random strobe
  • Electronic 'shutter' effect: Instant open and blackout
  • Zoom: Motorized
  • Pan: 540°
  • Tilt: 200°
Control and Programming
  • Control options: DMX
  • DMX channels: 14
  • White balance control: RGB adjustment
  • 16-bit fine control: Dimming, pan and tilt
  • DMX address setting: Control panel with LCD display
  • DMX compliance: USITT DMX512/1990
Optics
  • Light source: 12 x 10 W RGBW Osram Ostar LEDs
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
  • Zoom range: 10° - 60°
  • *Figure obtained under manufacturer's test conditions
Construction
  • Color: Black
  • Housing: High-impact flame-retardant thermoplastic
  • Ingress protection rating: IP20
Installation
  • Mounting points: One quarter?turn bracket for rigging clamp
  • Location: Indoor use only, must be fastened to surface or structure
  • Orientation: Any
  • Minimum distance to illuminated surfaces: 200 mm (8 in.)
  • Minimum distance to combustible materials: 100 mm (4 in.)
  • Minimum clearance around fans and vents: 100 mm (4 in.)
Connections
  • AC power in/thru: Neutrik PowerCon
  • DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical
  • AC power: 100-240 V nominal, 50/60 Hz
  • Power supply unit: Auto-ranging electronic switch mode
  • Fuse: T 3.15 A
  • Recommended Miniature Circuit Breaker*: Type D
  • *Per IEC 60898/UL489/CSA C22.2 No. 5
  • Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
  • 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
  • 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
  • Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
  • Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
  • Cooling: Forced air (temperature-regulated, low noise)
  • Maximum ambient temperature (Ta max.): 40° C (104° F)
  • Minimum ambient temperature (Ta min.): 0° C (32° F)
Approvals
  • EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
  • EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
  • US safety: UL 1573, UL 8750
  • US EMC: CFR Title 47 Part 15
  • Canadian safety: CSA C22.2 No. 166
  • Australia/NZ: C-TICK N4241 / RCM

Ce matériel en situation