CLAY PAKY Sharpy

Projecteur lyre asservie, type Spot, 190W, 17 gobos

Descriptions détaillées

POWER SUPPLIES

  • 115/230V  50/60 Hz

INPUT POWER

  • 350VA at 230V 50Hz

LAMP SOURCE

  • Lamp system with a short arc burner in a reflector
  • Type MSD Platinum 5R (L10103)
  • Output Lamp power: 189W
  • Colour temperature 8000 K
  • Average life 2000 h

OPTICS

  • 3-lens HQ optical group (patent pending)
  • Zoom: from zero to 3.8°
  • Focus: electronic
  • Light output at 20 meters (65 feet): 59,760 lux

COLOR SYSTEM

  • Interchangeable color wheel with 14 colors + open

EFFECTS SECTION

  • Interchangeable gobo wheel with 17 fixed gobos + open
  • High speed shake effect
  • 8-facet rotating prism
  • Frost filter
  • Mechanical shutter and adjustable speed strobe effect
  • Mechanical dimmer

CONTROL AND PROGRAMMING

  • Max 20 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input

BODY

  • Aluminium structure with die-cast plastic cover.
  • Two side handles for transportation.
  • Device locking PAN and TILT mechanisms for transportation and maintenance.

MOVING BODY

  • Travel:
- PAN = 540° - TILT = 250°â€¨Maximum speeds:
- PAN = 2.45 sec 
- TILT = 1.30 sec
  • Resolution:
- PAN = 2.11° - PAN FINE = 0.008°â€¨- TILT = 0.98° - TILT FINE = 0.004°
  • Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

  • Long life self-charging buffer battery
  • Pre-set macros
  • Function reset from the lighting desk
  • ON/OFF lamp control from the lighting desk
  • "AUTOTEST" function from menu
  • ETHERNET ready
  • Electronic monitoring with status error
  • Cooling system monitoring
  • DMX level monitoring on all channels
  • Internal data transmission diagnostics
  • Firmware upgrade with no power
  • Firmware upload from another fixture

SAFETY DEVICES

  • Bipolar circuit breaker with thermal protection.
  • Automatic break in power supply in case of overheating or failed operation of cooling system.
  • Forced ventilation with axial fans.

WORKING POSITION

  • Any Working Position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

  • In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE

Ce matériel en situation