Atterotech unDIOx2x

Interface Dante™ 2 entrées analogiques symétriques + 2 sorties analogiques symétriques sur connecteurs Euroblock.

Descriptions détaillées

The unDIO2x2 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system. The unDIO2x2’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

FEATURES AND BENEFITS
  • Small form factor, can be unobtrusively located near analog sources or sinks ?
  • Dual power (DC or PoE) means the unDIO2x2 will work in systems with either standard or PoE Ethernet switches ?
  • Three input gains accommodate common line levels, phan- tom power and dynamic mics ?
  • +24V Phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems ?
  • Two analog output gains to accommodate both consumer and pro line level requirements without overload ?

APPLICATIONS
  • Addition of microphones or other sources where analog cabling would be expensive or is not available back to a cen- tral rack ?
  • Network enable analog input power amplifiers or powered speakers ?
  • Multi-point network audio distribution ?

SPECIFICATIONS
  • Mic/Line Input Type: Balanced and RF filtered 3-pin deplug- gable
  • Phantom Power: +24V, software selectable
  • Mic/Line Gain: 0dB, +25dB, +40dB, software selectable
  • Input Impedance: >1.8K ohms at any gain setting
  • Equivalent Input Noise: -115dBu (+40dB gain)
  • Maximum Input Levels: +12dBu @ 0dB gain, -13dBu @ +25dB gain, -29dBu @ +40dB gain
  • Output Type: Balanced line level with automatic muting on loss of Dante signal
  • Output Gain: 0dB or +10dB, software selectable
  • Output Noise: <-90dBu @ 0dB gain
  • Maximum Output Level: +9dBu (@ 0dB output gain)
  • System THD: <.01% at any gain, input signal 3dB below maxi- mum
  • PoE Class: Class 0 802.3af PoE PD compliant
  • Certifications: FCC Part 15 Class A, CE (EN 55022 Class A)
  • Operating Temperature: 0 oC - 40 oC
Informations
Propriétés techniques
  • Consommation électrique : 3 W
  • Dimensions en flight-case (X1) : … x … x … cm
  • Dimensions unitaires : 27,1 x 164,48 x 87,98 mm
  • Poids en flight-case (X1) : … kg
Documents à télécharger
Catalogue Atterotech

Catalogue
PDF / Papier

APP PC

APP MAC

MyBox by Novelty

Bureau d'étude
Calculateurs